Skip to main content

Using Amplitude

Start here to find answers about Analytics, Recommend, Experiment, and Data.

2983 Topics
R
Roberto IglesiasNew Member
asked in Data Instrumentation
Why do I get two completely different result depending on the time interval

Hey everyone, I need your help. I’m getting two different results for the same query but with different time interval. Let me show you: Now, same chart, but now with Weekly instead of Monthly ⬇️Is this a bug? Or is there something I’m not interpreting correctly?​​Thanks for your help.

1591
Saish Redkar
Expert
11 months ago
R
Robert MalmsteinNew Member
asked in  Building and Sharing Your Analysis
Cohorts not filtering properly when added to chart

Hello! ProblemI am trying to create 2 cohorts based on the registration types we currently have out in different countries. So I’m trying to segment by country. I’ve tried 2 different ways:Using the User Property `Country` Using one of my own events with an event property called `country`When I go to create a chart using a funnel and I Segment by the Cohort, it pulls in more countries than exist in the cohort I create. Example with images:This is the Cohort I created using an event property called Full Reg UsersThis is the result when added to a chartHere’s how I’m using the Cohort in the chart Using the user property acts the exact same way. Why is it pulling more countries than I put in the cohort? Shouldn’t it be filtering them out? Why am I doing this?I want an easy way to segment these users and someone else at the company can use it without worrying about which country is what. They can just use `Full Reg Users` Cohort and see what’s going on with them. Thanks!

1452
R
11 months ago
N
Nick NerovNew Member
asked in  Building and Sharing Your Analysis
Amplitude with Clickfunnels?

Hey folks, I’m very new to Amplitude and wanted to ask for some help with tracking all the funnel conversions in Clickfunnels with Amplitude.Any documentation or guidance on how to set that up and create funnel tracking?Any and all help is much appreciated.  Thank you.

1360
N
11 months ago
P
Conversationalist
Preston ZellerConversationalist
asked in Data Instrumentation
utm_campaign coming in as utm_name?

I have my utm_campaign coming in as utm_name and not sure how this is happening.Has anyone else seen this? If so, what was your remedy?

1130
P
Conversationalist
11 months ago
B
Becca_SlateNew Member
asked in  Building and Sharing Your Analysis
Pulling in export data that includes zeros

I’m trying to create a chart for exports that would include all customers, those who have exported AND those who have not. The goal here is to see a detailed chart of our monthly exports across the customer base, and to be able to see which accounts may need some attention at the same time. I tried a few different logics, but can’t find a way to bring in those non-events. 

1344
B
11 months ago
I
isinahumNew Member
asked in  Building and Sharing Your Analysis
Go back to new view in Analytics

Hi! I accidentally clicked the button that takes me to the old view in Analytics (where every button is now on the left). How do I go back to the new view (where the buttons are on the top)?

2583
Saish Redkar
Expert
11 months ago
P
Paul GriffithsNew Member
asked in Data Instrumentation
Referring domain unavailable from Segment + Amplitude Actions?

Hi there,We’ve just moved over from our legacy Segment + Amplitude Cloud integration to the updated Segment + Amplitude Actions integration, which is great because we now receive referrer and UTM user properties to analyse in Amplitude.However so far we have received no data for referring_domain and initial_referring_domain despite these user properties existing in our Amplitude project. Perhaps they are not supported by Amplitude Actions? There is no reference to them in the documentation.Thanks in advance for any help.Paul

1770
P
11 months ago
Boris Ostojic
Conversationalist
Boris OstojicConversationalist
asked in  Building and Sharing Your Analysis
Usage Interval not reaching 100% on the last day

Hi team, I just posted this question under the FAQ article, but I’m raising it here as well for the visibility’s sake with hopes to receive the answer faster. I don’t see this question being asked anywhere in this forum or under the FAQ. One thing that I keep running in to with most of my Usage Interval charts is the fact that they never reach a 100% on the last day of the chosen interval (usually 60 days), even though I clearly state in the segmentation part that only users who performed that returning action 2 or more times in the same time period should be taken into consideration.I was expecting to see a 100% by the last day but it’s never the case. Do you have any idea why this is the case?What am I missing? 

2202
paladin8
Team Member
11 months ago
A
Arundas TCNew Member
asked in Data Instrumentation
Which data source should I choose for a Next.js 13 project (App Router)?

Which data source should I choose for a Next.js (NextJS) 13 project (using App Router mainly)?The correct option isn’t clear in the “Select a Data Source” page, where I only see NodeJS SDK and React Native SDK as the closest possible matches (maybe).Thanks in advance for your reply.

13692
paladin8
Team Member
11 months ago
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Cohort with two time slots – calculating Viral K

I am in the process of building a Viral K table I have an event referralShared that triggers when a new unique URL is created for sharing invites. Another one referralSuccessfulAccept whenever an install happens post clicking a referralShared URL. To calculate Viral K, the referralSuccessfulAccept should be a week delayed from the referralShared creation. i.e., if I were to look at the Viral K for this week, it should only show last week’s referralShared and this week’s referralShared and compute. It should REMOVE all referralShared for this week. How do I achieve this?

1250
Q
Helpful Hero
11 months ago
J
John YatesNew Member
asked in Product Personalization and Audience Segmentation
Understand team activity on dashboards/charts

Is it possible to create a view of how many times and which dashboard/charts a team member is visiting?  Let’s say I have a dashboard called “My product dashboard” with 6 charts.  Can I understand who in my organization has visited, how many times, and which specific view they have looked at? I think what I’m asking is if Amplitude tracks user views per organization/account and makes those available in some way? Thanks! 

1482
J
11 months ago
M
Mukesh JamwalNew Member
asked in  Building and Sharing Your Analysis
Implement analytics in ruby

how I can implement analytics in ruby, language is not in options.

1831
Saish Redkar
Expert
11 months ago
F
Fran6New Member
asked in  Building and Sharing Your Analysis
Why I don't find back the same amout of people in my funnel analysis ?

Hello there, I’m trying to see how much time does it to convert between 2 events in 15 days. When i’m using the first way of measuring (Conversion) i’m finding that i have 830 users who converted. However when i try to split them in order to know when exactly during the 15 days the biggest amount of conversion take place (using Time to convert) I can’t find back the 830 conversions, instead i have 278 users. How to get the full amount of people ?  I join screenshot so you can see the gap of volume :) Thanks for helping me that would made my day to get the answer ! :) Regards,  

2272
F
11 months ago
M
martineeNew Member
asked in Data Instrumentation
Where did Amplitude get the device id from?

There isn’t user id in the service currently so I want to get device id first and then set device id as user id. So I set as below,import { setUserId } from '@amplitude/analytics-react-native'; import { getDeviceId } from '@amplitude/analytics-react-native'; const deviceId = getDeviceId();setUserId(deviceId); I tested several times with my test phones but device id didn’t match with my real test phone device id. (iOS&AOS both) It was not matched with any ids including IDFV, IDFA, UUID(iOS) or ADID(AOS). Plus, whenever I install my app, the device id is refreshed even if I log with the same account. Where did Amplitude get the device id from? And I can’t find user id in the User Look-up dashboard in the Amplitude.(All blank in the dashboard now) Can I check user id(device id as user id) in the User Look-up dashboard if I set setUserId(deviceId);? According to the manual(link), Amplitude uses user id and device id to identify unique users automatically then setUserId(deviceId);isn’t

7920
M
11 months ago
U
uytrm8gntbNew Member
asked in Data Instrumentation
LATEST MONOPOLY GO F REE D ICE AND ROLLS LINKS FOR 2023

D iscover the latest M onopoly Go F ree D ice Links F or 2023 anD learn how to get D ices in M onopoly Go. M aster the gaM e with valuable strategies anD enjoy enD less D ice-rolling F un. Let's Begin. https://t.co/BKCN7ECC4d M onopoly Go D ice is a boarD gaM e that coM bines the tiM eless charM oF M onopoly with an innovative twist in the F orM oF unique D ice. These special D ice aD D an exciting eleM ent to the gaM e, M aking it crucial F or players to strategize anD aiM F or M ore rolls. In this article, we'll D elve into strategies F or aM assing D ices in M onopoly Go, helping you increase your chances oF success anD outsM art your opponents.LATEST M ONOPOLY GO F REE D ICE AND ROLLS LINKS F OR 2023In M onopoly Go D ice, obtaining D ice rolls is essential F or your gaM eplay anD progression. Here are the steps to acquire D ice rolls in M onopoly Go D ice:Prepare the GaM e: Set up the M onopoly Go D ice boarD , property carD s, tokens, anD M oney F ollowing the gaM e's instructions

10
U
11 months ago
U
uytrm8gntbNew Member
asked in Data Instrumentation
Start a conversation, ask a question or share your idea

Start a conversation, ask a question or share your idea

1060
U
11 months ago
N
naianNew Member
asked in Data Instrumentation
How can I measure DAU/MAU in S3 Exported data format ?

Hello !I would like to measure MAU/DAU with S3 Exported data format. Define MAU such thatMAU(/DAU) : Monthly(/Daily) Unique Active Event WHERE user_id != None And here is the exported data JSON object schema:{  "server_received_time": UTC ISO-8601 timestamp,  "app": int,  "device_carrier": string,  "$schema":int,  "city": string,  "user_id": string,  "uuid": UUID,  "event_time": UTC ISO-8601 timestamp,  "platform": string,  "os_version": string,  "amplitude_id": long,  "processed_time": UTC ISO-8601 timestamp,  "user_creation_time": UTC ISO-8601 timestamp,  "version_name": string,  "ip_address": string,  "paying": boolean,  "dma": string,  "group_properties": dict,  "user_properties": dict,  "client_upload_time": UTC ISO-8601 timestamp,  "$insert_id": string,  "event_type": string,  "library":string,  "amplitude_attribution_ids": string,  "device_type": string,  "device_manufacturer": string,  "start_version": string,  "location_lng": float,  "server_upload_time": UTC ISO-8601 timestam

1893
Saish Redkar
Expert
11 months ago
M
mariocamusNew Member
asked in Data Planning and Governance
oAuth error when trying to connect Facebook Ads as a data source

Hello!I tried to connect Facebook Ads to Amplitude. I did all the required setup but when I get to the Verify Access section it shows this alert:Error: oAuth failedAmplitude was unable to access your Facebook Ads account using the provided OAuth information.How can I solve this?I tried to connect the Facebook Ads account again, but I do not know how to do delete the connection and connect it again. As you can see it says this: OAuth via Facebook AdsYou have successfully connected to a Facebook Ads account!But again, the problem with the oAuth still remains. What's happening? What can I do?Thanks in advance :)

2652
Jonathan Callahan
Conversationalist
11 months ago
R
Novice
racarman245Novice
asked in Data Instrumentation
Referring domain is "None" > 70% of new users

When I do a segmentation analysis for any event, new users, and then group by referring domain, >70% of unique users have “none” referring domain. The blue bar is “none” This is very very unexpected, and don’t believe that 70% of new users type in the url of our app without finding it from another source.  I understand that if events are fired before user properties are sent, then those events will not have any referring domain, but I’m having trouble confirming if this is the issue or not, and what the solution should be? For a users’ first event in a session, should we force the identify calls to resolve prior to sending any subsequent event data?

9105
M
Well-Versed
11 months ago
A
Experienced
asivakumarExperienced
asked in Data Instrumentation
Tracking a user from browser to app

Hi,I would like to track a user using my webpage (with amplitude running) as the same user opening my app for the first time (with the iOS sdk running).I can set the deviceID on iOS app to track IDFV, but that value can’t be captured on the webpage, is there any other way to attribute the user across both applications ? Best,Anand 

8617
K
Helpful Hero
11 months ago
A
Alona NikolaevaNew Member
asked in Data Instrumentation
Problems with integration AppsFlyer and Amplitude

Hello, I'm trying to set up data streaming from Appsflyer. In the catalog I choose "integration with AppsFlyer". I am following the first step "Getting Started".But on the next step "Listen for event", I can't get the event from AppsFlyer. They don't have a "send test event" button on their platform, so I have this window open endlessly and can't complete the integration. 

1490
A
11 months ago
A
andrewkimjosephNew Member
asked in Data Instrumentation
Insanely Long Sessions

Hello, some users are logging crazy amounts of hours on our Flutter app. For example, one user has a session that’s lasted whole day. Incredible, right?Well, on our side, we believe that the issue could be because of any of the reasons:1. We have not implemented the Amplitude functionality on our platform as needed.2. The Amplitude Flutter SDK that we are using, which is a wrapper of the Amplitude Android and Amplitude iOS SDKs, is buggy.3. We have other conflicting tools.On the first and third reasons, we have raised the following GitHub issue sharing the way we implement it in our Flutter app, and it could be a reference for your engineers to tell us if we are doing something wrong or not.On the second reason, the resolution would be bringing this issue to the attention of the engineers who merge pull requests and who pay attention to the SDK.Is anyone else experiencing this, and what could be the solution. Kindly engage me below if you have any insights as to what could be happening

1430
A
11 months ago
J
jalmoraNew Member
asked in Product Personalization and Audience Segmentation
Week to Date vs Last Week to Date

Hello I want to compare WTD vs Last WTD and have the chart update on Sunday -Saturday Week range.Example Today is (Wed) Nov 15 (currently Sun 11/12, Mon 11/13, Tues 11/14, Wed 11/15 are in this week) and I want to compare WTD from previous week.  Example of comparisonSun 11/12 vs Last Sun 11/5 , Mon 11/13 vs Last Mon 11/6, Tues 11/14 vs Last Tues 11/7 , Wed 11/15 vs Last Wed 11/8. The current example only allows me to scan last 7 days and compare vs previous 7 days.  But our fiscal week is Sunday-Sat and I want the chart to dynamically always check knowing that Sunday is the first day of the week.  I can use the ‘between’ feature to initially select the Sunday as the first day of the week but I want it to do this dynamically every day I open the chart the next day & week

1240
J
11 months ago
G
GriffenNew Member
asked in Product Personalization and Audience Segmentation
How to retroactively De-Anonymize UID

Hi - We had previously had the UID anonymized in our amplitude- android integration. But now we have integrated a connection with our Database UID's . So that when a user signs up - it is the same UID on amplitude as our internal Database. We are trying to retroactively find a way to get the UID's that were anonymized mapped to the proper UID in the Database. Does anyone have any guidance on how we can retroactively De-Anonymize the UID’s and get them to match the propper UID in the database for each user?Thanks! 

2111
Saish Redkar
Expert
11 months ago
C
Casey HNew Member
asked in Product Experimentation
Redirect A/B test with Amplitude

Hi, Has anyone ever succeeded in settng up a redirect A/B test using Amplitude Experiment? We have been looking for instructions to set up redirect test but couldn’t find any. 

1720
C
11 months ago

Recent Tips & Tricks

Terms & ConditionsCookie settings