Skip to main content

Building and Sharing Your Analysis

Learn, ask questions, and help others build Amplitude charts and gain valuable insights!

  • 993 Topics
  • 2,470 Replies
993 Topics
C
christina zou
asked in  Building and Sharing Your Analysis
Averages per session, grouped by a property value?

I have an event called Choice. I want to know how many times on average this event was triggered user per session, grouped by a property value on Choice called Title.  How do I do that? 

420
C
C
ccixdNew Member
asked in  Building and Sharing Your Analysis
Event property with url parameter

In our product, customer page URLs include dynamic values in the format like /stores/:id/popular. Currently, when testing the integration with Amplitude, the actual id values are being sent, which makes it difficult to analyze the data effectively. How can I ensure events are sent correctly to Amplitude while addressing this issue?

3022
Jim_Kultgen
Team Member
johncooper
johncooperNew Member
asked in  Building and Sharing Your Analysis
Where are good places to hire full stack devs?

Looking to hire full stack devs who actually deliver? Here’s where to find the best talent 🔹 LinkedIn & GitHub – Perfect for scouting experienced devs and reviewing real projects.🔹 Upwork, Freelancer, Fiverr – Great for short-term work or scaling quickly.🔹 Toptal, Turing, Gun.io – Pre-vetted experts ready to jump in.🔹 Reddit (r/forhire, r/remotejs) – Underrated goldmine for freelance talent.🔹 Dev communities – Hashnode, DEV.to, Indie Hackers. Build relationships, hire smart.🔹 Full-stack dev companies – CONTUS Tech, Apptha, Simform, Netguru, Brainhub are solid choices for long-term product dev

500
johncooper
R
richaNew Member
asked in  Building and Sharing Your Analysis
Plot conversions and uniques over first X days since first event was seen

PROBLEMI get all my traffic from YouTube organic and as a result a video published 6 months ago will naturally cause fewer visits to my sales funnel than one published last week - even though the one published 6 months ago may be a better converting video.So to gauge success of a video, I need to track visits and conversions in first X days since publish (not just last X days, which is a separate measure for long-term success).NEEDIs there a way to set the date filter to “first X days since first event with utm_content=[video ID] was seen”?This way I can compare the success in a more apples-to-apples way between a video published 6 months ago vs last week.

480
R
A
Alex BullockNew Member
asked in  Building and Sharing Your Analysis
Median session length instead of average

My Session chart measured by “Avg Length” clearly has some outliers in it. I’d get much more useful info if I could switch to Median Length. Is that do-able as a formula?  

480
A
A
Andrew KalitaNew Member
asked in  Building and Sharing Your Analysis
Amplitude Typescript SDK, Web Worker Support.

Hello, I am trying to integrate Amplitude into my Chrome Extension (MV3). I am planning to send events from both sidepanel (chrome sidepanel, not a content script), and background script - web worker.While sidepanel works as expected background script doesn’t have a proper access to cookies.1. Is there a way to set my own implementation of cookie provider?2. Maybe current Amplitude Typescript SDK already supports the environment of web workers?Edit:I see that typescript SDK has some abstraction like cookie storage, but I am not yet sure how to access / set it.https://github.com/amplitude/Amplitude-TypeScript/blob/032d7daf06d03f6b2384fc27ae2fc1ab09fdac4f/packages/analytics-browser/src/config.ts#L322

961
A
A
Alex BullockNew Member
asked in  Building and Sharing Your Analysis
Bug or feature: cohort segment filters duplicating on dashboards

Hi, I can’t tell if this is a bug or a feature I’m mis-using. When I have a chart with a segment filtered to a cohort and then save that chart to a dashboard that also has that cohort as a filter parameter, I see the cohort segment applied twice. So on the dashboard the data label shows up as “cohort;cohort” which looks really messy. Also in this case if I click into the chart I see the filter applied twice.I think the desired behavior would be to recognize when chart and dashboard are filtering the same property and defaulting to the dashboard setting to apply it only once. My current workaround is saving charts with no filter and only having the dashboard parameter filter applied. This isn’t ideal though because I would prefer the charts to have the filter applied by default if anyone navigates directly to them.  Thanks! 

530
A
I
Ismail KarchiNew Member
asked in  Building and Sharing Your Analysis
custom lifecycle

Hello,I am trying to build a custom lifecycle but got stuck; i want this definitions:New users per day, where "New" is defined as anyone visiting the site who hasn't yet done their 20th creation (i.e. it's not necessarily their first day and they may not even create anything today) Activation rate for new visitors (% of them that do their 20th creation today). I think this is slightly different to NURR, at least once we have some more buckets/segments (new users wouldn't go straight to "current" on their 20th creation, I think there would be some intermediate state where we're still conditioning them to have higher retention). Current users : users with atleast 20 creations Dormant Users - This seems to be very low. I want to bucket all past users who have been inactive for >1 month in here. I'm not sure if that's necessary but if it is, there would be millions of users falling into this bucket.a creation is a defined even from :“submit_create_form This is fired once when a user sub

580
I
J
Novice
Jacob LynchNovice
asked in  Building and Sharing Your Analysis
Segmenting by User Property after event

We have a conversion event that occurs before certain user properties are set, but we need to segment these conversion events by demographic properties that are collected later in the user journey.Specifically, users convert before we collect demographic data like [age, location, etc.], but we want to understand which demographic segments are converting from which acquisition sources. We've tried looking at user property settings in Amplitude but haven't found a way to retroactively apply properties to earlier events.Is there a way to segment historical events by user properties that were set after those events occurred? Or would we need to modify our tracking implementation to capture this data differently?

590
J
Novice
A
Arthur Gabriel Camacho MarquesNew Member
asked in  Building and Sharing Your Analysis
10/10 saved charts reached

Hi, Amplitude Community!I’ve hit the limit of 10 saved charts on my account, but when I go to the "All Content" tab, I can only find 4 charts. Could anyone help me figure out how to locate the other 6 charts? Are there specific filters or settings I might be missing?Thanks in advance for your help!

1091
A
Walter Galvão
Walter GalvãoNew Member
asked in  Building and Sharing Your Analysis
Web traffic: analytics reporting inflated numbers?

Hi there, I'm seeing Amplitude report up to 8x more traffic than Plausible. Using @amplitude/analytics-browser 2.9.3 on NextJS. Amplitude is init on a useEffect in pages/_app.tsx I'm filtering events on Amplitude by Page Location === exact URL of my home page. Same on Plausible. We have both Plausible and Amplitude JS scripts / api endpoint behind our own proxy, bypassing adblockers. We have enabled the "Block bot traffic" filter on Amplitude several weeks ago. One weird pattern I noticed is Amplitude showing us some IPs consistenly creating 20+ unique users. Doesn't seem to be big enough to justify all the extra traffic reported though. I trust Plausible numbers to be more accurate here, and that's very unfortunate since I want to measure my funnel using Amplitude. My trial conversion rate will go below 1% with these inflated numbers. Any ideas what could be going on? Could it be that Amplitude's bot filtering is just bad? Thanks

700
Walter Galvão
C
christina zou
asked in  Building and Sharing Your Analysis
Can I make a dashboard variable that gets passed into a chart?

I have a event called visit, with a field called StoryId. I want my dashboard users to be able to enter in a value for StoryId on the dashboard Then I want all the charts in the dashboard to filter storyId by that value  Is this possible?

621
Saish Redkar
Expert
B
Bryce FosterNew Member
asked in  Building and Sharing Your Analysis
Guides & Surveys Install

Hello all, we’re working on implementing the guides and surveys functionality and running into a few issues and looking for any guidance or support from other users who have run into these issues. The survey does not immediately load for the user. The user is required to refresh the page before the survey is shown. When targeting a specific page for the survey, when the user lands on that page the survey is shown (note: this is after a refresh still) however, we want to only show this on one page, and when the user moves to another page, the survey remains. 

1711
R
B
Bryce FosterNew Member
asked in  Building and Sharing Your Analysis
Guides and Surveys Install Issues

Hey Community, I tried posting these questions before but didn’t receive much traction, hoping this one gets movement. We’re having some issues with the guides and surveys install, but hope these can be resolved. The survey does not immediately load for the user. The user is required to refresh the page before the survey is shown. (Note: We are filtering on the targeted users. When we turn this off, the survey loads immediately.) When targeting a specific page for the survey, the survey is shown when the user lands on that page (note: this is still after a refresh, as pointed out in item 1). However, we want to only show this on one page, and when the user moves to another page, the survey remains.Notes: We're a single-page application, so we're wondering if this plays a part in that. The documentation for the implementations was not descriptive on a SPA, so any support here would be great.

1801
R
U
usonlineclasstakerNew Member
asked in  Building and Sharing Your Analysis
US Online Class Takers

US Online Class Takers assist people studying online with their online classes, courses, exams, assignments or dissertation projects. Boasting a qualified and diverse faculty of tutors well versed with a variety of subjects, we guarantee timely submissions, guaranteed grades and 24/7 customer support with a money back guarantee~ https://usonlineclasstaker.com/

1271
B
H
havelockone45New Member
asked in  Building and Sharing Your Analysis
Interior fit out company abu dhabi

An Interior fit out company abu dhabi specializes in transforming bare spaces into functional, aesthetically pleasing environments tailored to residential, commercial, and hospitality needs. These companies handle everything from design conceptualization to final execution, ensuring high-quality finishes that align with client expectations. In Abu Dhabi, where architectural excellence is a priority, a professional fit-out company offers services such as space planning, material selection, carpentry, flooring, lighting https://www.havelockone.com/fit-out-contractors-abu-dhabi/

490
H
A
Artem SmolinNew Member
asked in  Building and Sharing Your Analysis
REST API with "group by"

Hello,I’m trying to get data via the Dashboard REST API and was able to successfully pull data via the event segmentation endpoint. However, for my next chart I need to use a group_by and use custom event propertie for grouping by. I have the following input parameters and and receive response with error:As you can see from the screenshot, “click details” is a custom event I use and “isin” is an event propertie I’d like to use for group by. If I deactivate “g” parameter or switch value for it to “platform” the request works fine and I receive a proper answer. What do I do wrong with “group by”? I can tell for sure that “isin” event propertie is valid in my project and I can use it in amplitude web interface and receive a proper graph:  

750
A
S
shawnedgeworthNew Member
asked in  Building and Sharing Your Analysis
Unity 6000.0.23f1 stucked at build addressables and normal building

Hi. We use the Amplitude Unity plugin. There are also other plugins in the project:AppLovin Tenjin Firebase: Auth, Crashlytics, FirestoreWe also use ExternalDependencyManager for Unity.The problem started with the Addressables build hanging. Always on the scene file or the ProcessScenes() method. We got this information from the Unity dialog box. The Addressables build process even took up to an hour. After that, we did not wait any longer. Since it usually takes 1-2 minutes. Another problem we noticed was that the ForceResolve() method from ExternalDependencyManager stopped executing. It does not produce any logs or errors, even with VerboseLogging = true. The build also stopped building, we think that this is also related to all this.Interestingly, after deleting the Amplitude plugin from Package Manager, everything started working for us. This is the second time. The first time, the AmplitudeDependencies.xml file helped us. Now this file is in the project, but it does not help. We a

570
S
C
christina zou
asked in  Building and Sharing Your Analysis
Retention by device ID?

I want to calculate my retention by device ID. how do I do that? 

1101
Saish Redkar
Expert
S
Sercan OzdemirNew Member
asked in  Building and Sharing Your Analysis
Nothing happens when connecting Slack

Hello, We’re trying to add Slack to our amplitude account to receive daily reports etc. But when we try to connect our Slack app to amplitude simply nothing happens.Is this related about our free plan of Amplitude or something buggy?Rg,Sercan

680
S
timediver
Novice
timediverNovice
asked in  Building and Sharing Your Analysis
Event pie chart segmented by event properties

I have an event with different properties (single choice results). As an end result, I’d like a pie chart with 100% being the uniques and the percentages related to how many users have a specific event property. Couldn’t figure it out so far and would appreciate some help. 

21517
Beth Saunders
Community Manager
F
FrederikNew Member
asked in  Building and Sharing Your Analysis
Cannot finish setup

Hello,  I’m stuck at the very basic initial step of setting up amplitude. I’ve pasted the snippet to our page, and I am seeing events being registered in the chrome extension. Still, when I return to the amplitude page setup, I see “listening” and no data received, while “finish setup” is greyed out. Can this be related to the fact that I’m testing this out in our staging environment somehow? 

1381
R
X
Xiaofei GeNew Member
asked in  Building and Sharing Your Analysis
Session still automatically tracked when `optOut == true`?

I’m using AmplitudeSwift SDK to my iOS app. I have a toggle in the app to allow users to opt out the analytics. The SDK document states it should be as simple as setting optOut = true.let amplitude = Amplitude(    configuration: Configuration(        apiKey: AMPLITUDE_API_KEY,        optOut: true    ))However, I implemented the constructer in my code to respect user preferences. private init() { let analyticsEnabled = UserDefaults.standard.bool(forKey: "analyticsEnabled") amplitude = Amplitude(configuration: Configuration( apiKey: Constants.amplitudeKey, optOut: !analyticsEnabled )) }It works that manual trackings are stopped, but I can still receive the anonymous session tracks on my dashboard. Is it expected? How can I entirely opt out the user in that case?  

660
X
M
Matt McCarthyNew Member
asked in  Building and Sharing Your Analysis
Amplitude to hubspot cohort sending

I am trying to send a cohort to Hubspot. Properties I wish to sync are emails. I wanted to stream events but this seems an enterprise plan on Hubspot! Can someone advise how to send a basic cohort of emails to hubspot (saved in contacts). My cohort is created based on a sign up event with an email as property. I wish to senf this email property to Hubspot and save in contacts...or as a workflow. The sync does not work. I am getting a generic message about my form. What form?? This error message is telling you that there is a problem with the fields in your form.

6272
R
Experienced
S
Novice
swym teamNovice
asked in  Building and Sharing Your Analysis
Amplitude to Hubspot Sync

Hi, I am looking to integrate to hubspot using cohorts sync but I keep getting a permission error while doing so - saying that i do not have the right scopes. We have one sync created in a dev account but need help to get it to our actual production account

2816
R
Experienced

Recent Tips & Tricks

Terms & ConditionsCookie settings