Skip to main content

Using Amplitude

Start here to find answers about Analytics, Recommend, Experiment, and Data.

2980 Topics
Q
Quoc LeNew Member
asked in Data Instrumentation
Transform Page Viewed events

Is there a way to transform Page Viewed to the dynamic path so it’s more meaningful OR does it have to be done in the tracking code?      

1663
Saish Redkar
Expert
9 months ago
F
Fran6New Member
asked in  Building and Sharing Your Analysis
[HELP] How to know how many of my readers read my articles completely ?

Hello there, I would like to know how many of my readers read my articles completely in other way how many percent of from all my articles are read from A to Z ?To do that, i have an event A that tell me that my user are viewing the article and then after some scroll down and some time spend on the page an other event (B) told me that they have finished the article. So my guessing was to do a funnel chart from event A to event B, however how to to be sure that the event B is from the same article than event A ? It’s also possible that he starts reading one article, did’nt like it, went on anohter one and this time finished it and so trigger event B.Can we solve this by using “holding a constant” by the url or the name of the article, to be sure he stays on the same article ? And should I count by Unique or by total ? Can you help me with this by answering me if i’m doing it correctly or not ?  Thanks in advance ! :) Here is the screen of what I think is right :  

1671
R
Conversationalist
9 months ago
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Hourly tracker but start from a particular hour (00:00)

 Is it possible to set from which hour it should track? Here’s my problem: right now, it's 24 hours, which messes up the cumulative graph for a day. Let's say I want to track the sales for one day (defined from the start of my timezone 00:00). With the current logic of hourly and set to cumulative, it will likely start previous to the previous day.

1081
Saish Redkar
Expert
9 months ago
I
Inbar ZilberNew Member
asked in Data Instrumentation
Collecting daily data about number of users who went through funnel

Hello, I would like to have a chart/dashboard from which I can take data every day, where the data is the number of users who went through a specific funnel. I’ll elaborate: If for example my funnel is made up of these events: event_1, event_2, event_3, event_4, etc. I would like to know every day, how many users went through the funnel up to event_1, how many users went through the funnel up to event_2, how many users went through the funnel up to event_3 etc etc. I want to take this data daily, that is, if I come today to Amplitude, I would like to know how many people went through each piece of the funnel for the entirety of yesterday.  The best solution I found for this by now is creating a funnel of the events, then creating a cohort for users who completed each step in the event, in the last day. Then, create a segmentation chart with the event - any_active_event, and add all the cohorts. Is this accurate? Is there an easier way?  Thanks

1641
Saish Redkar
Expert
9 months ago
T
Tullio CunhaNew Member
asked in  Building and Sharing Your Analysis
How to view the page urls using the default events on Journeys?

I'm creating a Journey chart and I cannot check what are the URLs using the Amplitude default events  

2511
Saish Redkar
Expert
9 months ago
F
Federico HuneeusNew Member
asked in Product Experimentation
Trouble tracking exposure events. Assignment events work, exposure doesn't

Hey guys, can someone give me a hand. I’ve followed pretty much every step in the guides to track exposure, but nothing gets registered on my dashboard. What I’ve done is loading the experiment.start() and then running the line const variant = experiment.variant(‘experiment-one’) [experiment-one is the flag], but it doesn’t work.i tried both the Amplitude and Segment integration, but no luck. This is one way I tried (with Segment → )export async function loadScript() { const promise = new Promise((resolve, reject) => { const script = document.createElement("script"); script.type = "text/javascript"; // script.async = true; // script.defer = true; script.text = ` !function(){var analytics=window.analytics=window.analytics||[];if(!analytics.initialize)if(analytics.invoked)window.console&&console.error&&console.error("Segment snippet included twice.");else{analytics.invoked=!0;analytics.methods=["trackSubmit","trackClick","trackLink","trackForm","page

1310
F
9 months ago
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Calculate LTV or total dollar spent per user?

I haven’t an event purchaseditem with a dollar value of 5 for each item.How can I find the LTV or the average and median number of times purchaseditem (consequently) has been triggered by a user?

1671
Saish Redkar
Expert
9 months ago
M
Novice
Matt RudinNovice
asked in Data Instrumentation
Event Properties Not Sending to Customer.io

Looks like something may have broken with the Customer.io integration since late November, where Amplitude event properties are no longer appearing in Customer.io with the events. Did something change in the integration? We still see events under the right users, but they are coming in with no properties, even though amplitude shows the properties there..

1060
M
Novice
9 months ago
Joanna L
Joanna LNew Member
asked in  Building and Sharing Your Analysis
Amplitude's number of unique users who triggered a session is more than the number of total account in my database

Hi There, We just set up Amplitude for our product.  I want to analyze the number of unique users come into our product per month.   I use the event, Session Started, and the UNIQUE (A) formula 👇🏻.  But the sum of the monthly unique users who triggered this event is greater than the total number of accounts in our database, which cannot be possible. Did I set up the formula and the analysis wrong? 

6033
Saish Redkar
Expert
9 months ago
K
Kirill PenchukovNew Member
asked in Data Instrumentation
Exporting full list of users from Amplitude

Hello Amplitude Community,I'm currently seeking options to export a full list (not for last month/year only) of unique users from our Amplitude data. My objective is to retrieve basic user information such as user_id, email, first_name, and last_name for the entire duration of our usage of Amplitude.So far, I've investigated several places, including:Export API: While this does provide detailed event-level data, the granularity and volume (even for short time spans) result in too large exports that aren't practical for my needs. Dashboard REST API Endpoints: I've looked into various endpoints such as User Activity, Active and New User Counts, and User Search. However, these seem to provide either detailed data for individual users or aggregate statistics, rather than a comprehensive list of all unique users.Given these challenges, I am reaching out for guidance:Is there an efficient way to export a list of all unique users (with basic details like user_id, email, first_name, and last_n

6221
Saish Redkar
Expert
9 months ago
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Track all users who have not triggered an event

I have an event “visitedShop” . How can I build a chart to tracking how many users who have never visited the shop over time. Not just for that day, but overall.  

1541
Saish Redkar
Expert
9 months ago
D
Daniel BarriaNew Member
asked in Product Experimentation
Evaluation REST API not working

Hey everyone! Here is a situation that I am facing beign new using amplitude. We’re trying to use amplitude Evaluation REST API to get users’ variant for a feature flag we’ve created. All seems to be alright, deployment key is created, feature flag is created and active but for some reason when I try to get user variant it always returns an empty objecthttps://www.docs.developers.amplitude.com/experiment/apis/evaluation-api/#exampleI’ve tested from that page and also doing a cURL. Any help would be awesome! Thanks

2683
D
9 months ago
L
Lee LiaoNew Member
asked in Data Instrumentation
W/com.amplitude.api.DeviceInfo(15617): Google Play Services SDK not found for app set id!

hiwe are trying to integrate Amplitude in our Android App, but In console Amplitude SDK show the following:W/com.amplitude.api.DeviceInfo(15617): Google Play Services SDK not found for app set id!We are rather new to this tool, does anyone why and how to fix it? much appreciate your help!

3920
L
9 months ago
R
Richard DickeyNew Member
asked in Data Instrumentation
Amplitude.Types.LogLevel constants not defined in my Javascript code

Using the Browser SDK 2.0 and in my amplitude.init call I’m trying to set the logger level using the constant amplitude.Types.LogLevel.Debug but I get the following error in the console:Uncaught TypeError: Cannot read properties of undefined (reading 'LogLevel')Did I miss some step to be able to see the types constants when setting up?This is the start of my amplitude.init call:    amplitude.init(apiKey, userId, {        logLevel: amplitude.Types.LogLevel.Debug,        defaultTracking: { 

2170
R
9 months ago
Mike Loustalot
Mike LoustalotNew Member
asked in  Building and Sharing Your Analysis
Is there a best practice for grouping charts in a dashboard and then swapping out a global filter?

We build mobile apps for golf courses under one project id. Within the project we have an event property called facility_name where we can filter events by this property. I have created ten reports without a facility_name filter. What is the best way to add these ten reports to a dashboard and filter the dashboard by facility_name, a save it as “facility_name dashboard”, and then duplicate and save with a different “facility_name?” I have spent several hours trying to teach myself how to do this but I can’t do it and I can’t find any help.  We are on a Plus Account.

1615
dangrainger
Expert
9 months ago
I
ilanyrozenNew Member
asked in Data Planning and Governance
returning unique users out of new users

Dear CommunityIm trying to get 2 numbers :1 - the unique number of users who started (new users) in some period2 - from that group of users I’d like to get the total distinct number of the ones who returned to the app (but not on the same day e.g. starting from day 1 and so on)I tried several ways to get that but couldn't get the unique (distinct) number of returning usersAppreciate your help !Ilan 

2353
S
Conversationalist
9 months ago
P
PhilNew Member
asked in Product Personalization and Audience Segmentation
Identifying users with a new mobile device

Hey everyone - I’m trying to build a cohort for users that have recently upgraded their mobile phone so that I can message them with steps to keep them in a happy state. For example, I’m looking for users who recently got a shiny new iPhone 15 (or whatever). I’ve tried building a cohort with the “distinct value” for device type. And I’ve also tried building a segment using offsets, but in both cases I’m unable to eliminate the tricky scenario where users have multiple devices that they are going back and forth on (or perhaps multiple users sharing credentials). Appreciate any suggestions / guidance from the experts here! 

1160
P
9 months ago
R
Novice
Renee CooperNovice
asked in Data Planning and Governance
How to move dashboards to another project?

Due to sensitivity of our event data, we have to remove it when a customer offboards -- not just the person data but the events themselves.Deleting event data is unsupported; we have to create a new project and backfill the sanitized data into it.But that means all our dashboards/analysis for all our other customers is still in the old project, which we need to delete.  How do we move the dashboards from the old project to the new, without having to re-create them?Thanks!

3082
R
Novice
9 months ago
M
Marita AbrahamNew Member
asked in Data Instrumentation
install tracking data discrepancy

I’m measuring behaviour for a mobile app, it’s a free app. I’m seeing a major discrepancy between the number of installs registered by Apple App Store Connect & my internal database data vs. an event I’ve defined that gets fired when the user views the splash screen in the app. for example, for the same time frameApp Store connect shows 1300 first time downloads  My internal data says it’s 1270 first time downloads Amplitude reports 1110 users who fired my splash screen event for the first time Amplitude reports an even lower number of 948 if I look at “New Users” As you can see there’s a 14% difference between Amplitude and Apple at best and a 27% difference between Amplitude and Apple at worst. I can’t seem to figure out why there’s such a big difference. I read the FAQ regarding IDFA and it doesn’t seem like App Tracking Transparency is the cause here (source)Can someone help me? 

1240
M
9 months ago
M
Novice
Marin RadovanNovice
asked in Data Instrumentation
Overwriting page view properties with custom one

Hi,in one product we are tracking, page path / url etc. are automatically created by tool we use (long story) and that don’t have proper pattern to group them somehow.So when we have a Page View event these properties get collected but are not in any way usable.When instrumenting browser sdk from Amplitude, can we somehow manually override these settings… E.g. Page Path = this, Page url = this etc.Or do we need to disable page view tracking there (which I don’t like because we use it on our web and I need this in all our app) and build custom event? Please recommend some solutions if possible… Looking for a solution that resembles this: https://help.fullstory.com/hc/en-us/articles/1500004101581-FS-setVars-API-Sending-custom-page-data-to-FullStory but not quite the same.

1460
M
Novice
9 months ago
G
Helpful Hero
GakaHelpful Hero
asked in Data Instrumentation
Amplitude Logger Error

Hello !I use React Native SDK and library "@amplitude/analytics-react-native": "0.5.1", and it’s work fine for IOS, but have some problem with Android. When I try some event I have error like on screenshot await ampli.load({ environment: 'production', client: { apiKey: apiKey, },})<Button onPress={() => ampli.login()} title='Login' />This code - how I initialize amplitude and call inside component .Could you please help me to find what might be wrong?

22057
N
9 months ago
C
Charlie HamiltonNew Member
asked in Data Instrumentation
Understanding Cohorts and Event Streaming

I am currently looking to use Amplitude to send necessary data to Hubspot in order to run a variety of automated workflows. Two projects I am currently working on are pulling NPS Score data from Appcues into Amplitude, then redirecting it to Hubspot (where it creates or update contact records to track individual NPS scores). Additionally, I am looking to better understand the optimal way to track new, registered users of our platform (tracked by the Event “complete registration”), where contacts are created and tracked into a welcome/onboarding automated workflow. I am having trouble understanding if these projects are best done using Cohorts or Event Streaming functionality. I have tried both routes with varying degrees of success. For the NPS Score, I have created a Custom Behavioral Event in Hubspot but I am not seeing the specific event property “score” on Hubspot which is needed in order to analyze specific responses. Additionally, I do not believe this creates/updates records to

1120
C
9 months ago
J
Jyothiswarup SeethalaNew Member
asked in  Building and Sharing Your Analysis
I was asked to perform a funnel analysis on Ecommerce data available on amplitude demo asked to make a funnel conversion on "VIEW ITEM DETAILS " event to "ADD ITEM TO WISH LIST" event but i didn't find that event . could you please help !!

here is the link of that amplitude chart https://app.amplitude.com/analytics/demo/chart/bi4n4pkx?source=copy+url  is it possible to make funnel analysis on that event . Please  let me know if we could do it or not .

1251
J
9 months ago
G
GofoodieonlineeNew Member
asked in Data Instrumentation
Online food delivery service in train from gofoodieonline.

Gofoodieonline is a remarkable online platform that has revolutionized the way people experience food.This innovative website provides an extensive range of culinary options, catering to diverse tastes and preferences. Gofoodieonline is a best online food order in train website for Indian railway passengers to book lunch, dinner order, Jain food, pure veg.They provide food delivery in Train. Get clean, fresh meals from reputable eateries delivered right to your train seat. We are an E-Catering partner that the IRCTC has approved, guaranteeing dependable dining service during your rail travel.This innovative website provides an extensive range of culinary options, catering to diverse tastes and preferences.Get clean, fresh meals from reputable eateries delivered right to your train seat. We are an E-Catering partner that the IRCTC has approved, guaranteeing dependable dining service during your rail travel.

1200
G
10 months ago
G
GofoodieonlineeNew Member
asked in Data Instrumentation
Online food delivery in train from gofoodieonline.

Gofoodieonline is a remarkable online platform that has revolutionized the way people experience food.This innovative website provides an extensive range of culinary options, catering to diverse tastes and preferences. Gofoodieonline is a best online food order in train website for Indian railway passengers to book lunch, dinner order, Jain food, pure veg.They provide food delivery in Train. Get clean, fresh meals from reputable eateries delivered right to your train seat. We are an E-Catering partner that the IRCTC has approved, guaranteeing dependable dining service during your rail travel.This innovative website provides an extensive range of culinary options, catering to diverse tastes and preferences.Get clean, fresh meals from reputable eateries delivered right to your train seat. We are an E-Catering partner that the IRCTC has approved, guaranteeing dependable dining service during your rail travel.

1430
G
10 months ago

Recent Tips & Tricks

Terms & ConditionsCookie settings