Skip to main content

Data Instrumentation

Learn, ask questions, or help others with sending data and extracting data from Amplitude.

  • 1,689 Topics
  • 4,124 Replies
1686 Topics
B
BabysharkNew Member
asked in Data Instrumentation
How to check data by time the user accessed

Hi, I have a question about amplitude data chart. What should I do for checking event data by the time they accessed the product? Now, I’m using segmentation chart and check ‘hourly’ data. But it can’t help to figure out what time users use our product most on average. Thanks!

16991
Saish Redkar
Expert
A
ammarNew Member
asked in Data Instrumentation
Why in web browser Device Id before and after Login difference?

Hi, I’m a new user for Amplitude.I have a case, that when I tracked my funnel registration, my visitor in web browser identified as difference device id and session from their device id and session before register. I tested this journey in Google Chrome, but some how when I tested this flow in Mobile Web, the device ID was consistence before and after join.For instance:Device ID from Event before Join RegistrationDevice ID from Event After Join Registration Based on this article https://help.amplitude.com/hc/en-us/articles/115003135607-Tracking-Unique-UsersI assume, my journey would be consider as difference amplitude id right, and it would implicated if I wanna create funnel conversion cause my journey don’t consider as same person. So is this case caused by $identify or what should I do to solve this issue?Kindly for your advice in my cases. Thank you 

24023
A
J
Conversationalist
JoeKDoeConversationalist
asked in Data Instrumentation
How to update charts upon Saved Segments update?

Hello, I have 50+ charts using different segments such as:new users registered users premium users churned users …I need to update the definition of these segments, but it doesn’t update the charts - I don’t know if it’s a bug of the Amplitude designers want me to manually update 50+ all day long Is there any solution? Thanks

6858
Saish Redkar
Expert
samplitude
Team Member
samplitudeTeam Member
posted in Data Instrumentation
What is Amplitude’s definition of a Session as it pertains to Segment?

Amplitude’s Best Practices:  Note: Segment does not have the concept of a session. It is strongly recommended that you review this documentation  if you are looking to define a session in Amplitude within User Look-Up or to fully use any of Amplitude’s session-based charts (such as User Sessions & Pathfinder Users). In Amplitude, a session is defined as a period of time that the user has the application open in the foreground. If session tracking is available, then events logged within the same session will have the same Session ID. A new session is started if the application enters the foreground after being in the background or closed for more than 5 minutes. The session time-out windows may be customized in Amplitude (see documentation here).  ​

23571
samplitude
Team Member
samplitude
Team Member
samplitudeTeam Member
posted in Data Instrumentation
I set up the Amplitude Destination in Segment - why am I not seeing any data in Amplitude?

   Amplitude’s Best Practices:  Segment customers / prospects must send data to Amplitude by calling “track”. Data will be visible after they track their first event. For Segment customers who are used to different naming conventions, the difference between an event property and user property is simply that Amplitude allows Segment customers to specify their own event properties and user properties. See Amplitude Help Center document to further understand the difference between the two types of properties.   

4101
samplitude
Team Member
samplitude
Team Member
samplitudeTeam Member
posted in Data Instrumentation
What are the pros + cons of using Amplitude’s client-side bundled Segment integration? 

 What are the pros + cons of using Amplitude’s client-side bundled Segment integration?   ​​​​​​​Amplitude’s Best Practices:Pros:Adding Amplitude native SDKs adds extra tracking functionality, namely session tracking, and automatic user property tracking. Events that are logged within the same user session will be grouped together when viewing that user's stream on Amplitude Dashboard. This also allows for session length calculations on Amplitude's platform. The SDKs will also automatically record several user properties such as device type, operating system, and user agent. Here is a list of the user properties tracked automatically by our SDKs. Additional Segment Amplitude Integration Setting (in Advanced Settings) -- Track Session Events (disabled by default): If enabled, then the SDKs will automatically send [Amplitude] Start Session and [Amplitude] End Session events to mark the start and end of a user's mobile session. With our SDKs installed, you can also directly interact

5841
samplitude
Team Member
samplitude
Team Member
samplitudeTeam Member
posted in Data Instrumentation
What settings should we enable in the Amplitude Destination for Page/Screen calls?

 What settings should we enable in the Amplitude Destination for Page/Screen calls?      Amplitude’s Best Practices:  For Web:  "Track Categorized Pages" is the most ideal setting to enable, but not all customers track a 'category' property. For Web, "Track All Pages" is the ideal setting as well, so all page calls are collapsed under a 'Loaded a Page' event in Amplitude. For Mobile:  Enable "Track All Pages" and Segment will send a "Viewed (Name) Screen" event - which is most ideal.  Most of the time, Segment/Amplitude customers have lower cardinality on mobile and it's helpful to break out each screen by name. Page Calls: Mutual customers oftentimes see events like 'Loaded a Page' and 'Viewed X Page' in Amplitude and get confused because those are not event names they recognize (e.g. they're looking for it among the events they track via Track calls). There is no equivalent in Segment's UI (Segment shows the raw page calls).  Mutual customers with

8771
samplitude
Team Member
samplitude
Team Member
samplitudeTeam Member
posted in Data Instrumentation
How do we avoid sending “Viewed /-” or “Loaded a Page” events to Amplitude from Segment?

How do we avoid sending “Viewed /-” or “Loaded a Page” events to Amplitude? Our event type names are coming from Segment into Amplitude in a very unpredicted manner  - specifically for event type names.We have even maxed our event limit.  Sometimes this points to underlying issues within your Segment Amplitude Destination settings - specifically for event type names.This leads to noisy events in your Amplitude taxonomy (and can even max your event limit!), like this:  Amplitude’s Best Practice: Add the page’s URL as an event property rather than event name.  For Page/Screen call settings in Segment: it’s better to surface how Page and Screen calls are transformed via the integration and sent to Amplitude. Right now this is located within the Amplitude Destination settings (so you’ll need to click into the settings to read the description) or in Segment's documentation. You may also be noticing a relative of the same issue - maxing out event types: In this case, when an Amplitude

15101
samplitude
Team Member
samplitude
Team Member
samplitudeTeam Member
posted in Data Instrumentation
Segment + Amplitude: Best Practices

Frequently Asked Questions:  How do we avoid sending “Viewed /-” or “Loaded a Page” events to Amplitude? What settings should we enable in the Amplitude Destination for Page/Screen calls? What is the difference between Segment’s Cloud Mode vs. Device Mode?  What are the pros + cons of using Amplitude’s client-side bundled Segment integration?  How do we set session in Amplitude while using Segment in Cloud Mode? I set up the Amplitude Destination in Segment - why am I not seeing any data in Amplitude? What is Amplitude’s definition of a Session?  Handy Resources: Note: for Segment Support: please contact your designated Segment Rep or Segment support (friends@segment.com)  Getting Started with Segment   Segment Tracking Plan (for all Segment customers) Introduction to Segment Guide  Segment/ Amplitude Developer Docs Segment Product Docs Segment Developer Docs Segment + Amplitude Recipes Maximize the ROI of your Data Management Platform | January 2021About the

11360
samplitude
Team Member
haoliu
Team Member
haoliuAmplitude Engineering
posted in Data Instrumentation
Create/export taxonomy from your design mock - Figma Plugin

Do you...Hate using spreadsheet to create taxonomy? Can’t map between event name with the web/mobile page? Recently we released Amplitude Event Planner in Figma to VISUALIZE the whole taxonomy planning process! We would love to hear feedback from you! 

6482
Saish Redkar
Expert
J
Team Member
john_amplitudeAmplitude Engineering
posted in Data Instrumentation
Unreal SDK in Development!

Looking for questions, comments, and suggestions!Unreal is the one of the most popular engines for building games on consoles, PC, mobile, and VR. We’re making an effort to create an SDK plugin for it in the coming months so that game developers can add analytics in Unreal.For a beta release, we plan to support iOS with APIs in C++ and Blueprint, with support for Android during general release and other platforms further in the future.

2590
J
Team Member

Recent Tips & Tricks

Terms & ConditionsCookie settings