Skip to main content

Building and Sharing Your Analysis

Learn, ask questions, and help others build Amplitude charts and gain valuable insights!

  • 973 Topics
  • 2,437 Replies
972 Topics
A
Almaz AubakirovNew Member
asked in  Building and Sharing Your Analysis
How can we change currency symbol to KZT or to none

Hi comminuty! How can we change currency symbol to KZT or to none?The issue is that there is no KZT (Kazakhstani tenge) symbol in Amplitude’s project setting.The charts are very misleading to our stakeholder. If there is no possibility of adding an extended currency list, how can we hide the symbol? Kind Regards, Almaz Aubakirov

2211
Saish Redkar
Expert
V
Victoria.DmitrievaNew Member
asked in  Building and Sharing Your Analysis
How do I find Median session per user on mobile apps?

Hi everyone, I am on a free tier and trying to find Median session per user for my iOS and Android apps. Is it even possible? The closes I got was using the Median of property value but I doubt that is the right thing.

2542
V
V
Valery YuntsevichNew Member
asked in  Building and Sharing Your Analysis
Reset all data and chart

Hi all! Two weeks ago I created a new project(board) in amplitude. At this moment I have a lot of testing events/charts and etc. And now I want to reset(remove) my project(board) with all my events/charts and etc. Question: How I can do it ? Thanks.

2441
Saish Redkar
Expert
Z
Team Member
Zhenia SemeninaTeam Member
posted in  Building and Sharing Your Analysis
Solution: segmenting by screen sizes

At Amplitude, gaining granular insights into user behavior is pivotal, and while we may not automatically track a 'screen size' property, you can always use our default properties to build this kind of analysis. Our alternative properties, like ‘Platform’, ‘Device Type’, ‘Device Family’, etc can help you with understanding your user's device dynamics: You can find the definitions of each property here . As an example, one way to analyze behavior based on screen sizes would be a segment-driven approach: creating distinct segments for each of the device types, leveraging the ‘Device Family’ parameter: Once you create your segments, you can save them and use in your charts: choose your pre-saved segments effortlessly from the dropdown list for seamless future analyses. You could also instrument and capture 'screen_size' as custom properties. You can collect this data on your side (on the backend/frontend), and send it over to Amplitude as event or user properties (e.g ‘screen_width’ and ‘

13681
V
T
Team Member
tsegallaTeam Member
published in  Building and Sharing Your Analysis
Are you looking to master retention? Look no further.

Amplitude allows you to power your products from Retention to Lifecycle. 👍 Rather than each chart type being used on its own, using these charts together can enable you to become a better data storyteller and dive deeper into the "why" behind your product usage data instead of just stopping at the "what" and reporting on retention rates. The key here is the Usage Interval view. Here's an example of how to do it. (It's a quicker read than it looks!) Build a Retention analysis based on a critical event that matters to you. Ideally, it's an event representing the main value proposition of your product or behavior the end user performs habitually. If the product was AmpliTunes, that might be "Purchase Song or Video." Chart example here . In this case, since we're looking for repeat behavior, we're using N-Day Retention . Once you grasp the retention rate, you'll likely question how "good" that rate is. Does daily retention make sense for your event, or is a different interval more appropr

5461
johnsonit
S
Conversationalist
srushti.wadekarConversationalist
asked in  Building and Sharing Your Analysis
Getting the baseline of days-until-feature-acquisition for each new user

Hello, I’m trying to set a baseline of days-until-feature-acquisition for each new user in Amplitude and track that month over month. Is funnel analysis the best approach to achieve this? Or is there any other approach I can take to get a baseline metric and track the same. Thanks!

1562
S
Conversationalist
H
Novice
Hubert DanilczykNovice
asked in  Building and Sharing Your Analysis
MRR Charts - How to do it

Hello!Could somebody tell me how to use Revenue event described here: https://help.amplitude.com/hc/en-us/articles/115003116888-Track-revenue to draw MRR chart per user? Please consider, that one payment (revenue) e.g 6000 $ can be connected to 5 different users like 5x1200$. Additionaly, this 1200$ can be an amount per 12 months, so its 100$ per month per one user. Do you have any idee? Or i should create my own custom event?

3514
H
Novice
R
Conversationalist
Rege DonossConversationalist
asked in  Building and Sharing Your Analysis
How to structure a view of current subscribers.

Imagine we have a setup right now where every user who comes to the site appears in amplitude. Every time an event is sent, there is a property called ‘subscribed = [true,false]’ We have a user property called ‘subscribed = [true, false] A user can subscribe for a monthly product, this fires an event `subscriptionTransaction’ We do not fire an event for cancelling a subscription, it’s not technically feasible given some externalities in our stack. What I'm trying to do now is to get a view of all currently active subscriptions. This would be: any user who ever did ‘subscriptionTransaction’, whose current subscription status is false. This doesn’t seem to be possible to make as a cohort. It doesn’t seem to be possible to create a segmentation like this. Honestly I’m a bit confused at the moment, this entire way of structuring and viewing data is wildly unintuitive and limiting. Any advice on how to do this, or should I just query our database and foget about amplitude

3022
R
Conversationalist
S
SkaNew Member
asked in  Building and Sharing Your Analysis
How to set the condition that at least 30 days must elapse between events?

Hello. Can you tell me how to put a condition that there must be at least 30 days between the first event and the fifth event?

1581
Saish Redkar
Expert
F
Novice
florianmielkeNovice
asked in  Building and Sharing Your Analysis
Time between "new" user and conversion to event (subscribe)

Hey, I’d like to analyze the average time between a new user being “first seen” in Amplitude and the subscribe event (if any). I’ve set up a funnel, but I am unsure if I set the correct parameter. Any suggestions? Please ignore the glitch in the chart. That was due to an issue with the screen capturing + scrolling. 🤷‍♂️

4889
C
F
Fran6New Member
asked in  Building and Sharing Your Analysis
[HELP] How to know how many of my readers read my articles completely ?

Hello there, I would like to know how many of my readers read my articles completely in other way how many percent of from all my articles are read from A to Z ? To do that, i have an event A that tell me that my user are viewing the article and then after some scroll down and some time spend on the page an other event (B) told me that they have finished the article. So my guessing was to do a funnel chart from event A to event B, however how to to be sure that the event B is from the same article than event A ? It’s also possible that he starts reading one article, did’nt like it, went on anohter one and this time finished it and so trigger event B. Can we solve this by using “holding a constant” by the url or the name of the article, to be sure he stays on the same article ? And should I count by Unique or by total ? Can you help me with this by answering me if i’m doing it correctly or not ? Thanks in advance ! :) Here is the screen of what I think is right :

2331
R
Conversationalist
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Hourly tracker but start from a particular hour (00:00)

Is it possible to set from which hour it should track? Here’s my problem: right now, it's 24 hours, which messes up the cumulative graph for a day. Let's say I want to track the sales for one day (defined from the start of my timezone 00:00). With the current logic of hourly and set to cumulative, it will likely start previous to the previous day.

1501
Saish Redkar
Expert
T
Tullio CunhaNew Member
asked in  Building and Sharing Your Analysis
How to view the page urls using the default events on Journeys?

I'm creating a Journey chart and I cannot check what are the URLs using the Amplitude default events

4061
Saish Redkar
Expert
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Calculate LTV or total dollar spent per user?

I haven’t an event purchaseditem with a dollar value of 5 for each item. How can I find the LTV or the average and median number of times purchaseditem (consequently) has been triggered by a user?

2571
Saish Redkar
Expert
Joanna L
Joanna LNew Member
asked in  Building and Sharing Your Analysis
Amplitude's number of unique users who triggered a session is more than the number of total account in my database

Hi There, We just set up Amplitude for our product. I want to analyze the number of unique users come into our product per month. I use the event, Session Started, and the UNIQUE (A) formula 👇🏻. But the sum of the monthly unique users who triggered this event is greater than the total number of accounts in our database, which cannot be possible. Did I set up the formula and the analysis wrong?

7703
Saish Redkar
Expert
Q
Helpful Hero
quintinparHelpful Hero
asked in  Building and Sharing Your Analysis
Track all users who have not triggered an event

I have an event “visitedShop” . How can I build a chart to tracking how many users who have never visited the shop over time. Not just for that day, but overall.

2461
Saish Redkar
Expert
Mike Loustalot
Mike LoustalotNew Member
asked in  Building and Sharing Your Analysis
Is there a best practice for grouping charts in a dashboard and then swapping out a global filter?

We build mobile apps for golf courses under one project id. Within the project we have an event property called facility_name where we can filter events by this property. I have created ten reports without a facility_name filter. What is the best way to add these ten reports to a dashboard and filter the dashboard by facility_name, a save it as “facility_name dashboard”, and then duplicate and save with a different “facility_name?” I have spent several hours trying to teach myself how to do this but I can’t do it and I can’t find any help. We are on a Plus Account.

2145
dangrainger
Expert
J
Jyothiswarup SeethalaNew Member
asked in  Building and Sharing Your Analysis
I was asked to perform a funnel analysis on Ecommerce data available on amplitude demo asked to make a funnel conversion on "VIEW ITEM DETAILS " event to "ADD ITEM TO WISH LIST" event but i didn't find that event . could you please help !!

here is the link of that amplitude chart https://app.amplitude.com/analytics/demo/chart/bi4n4pkx?source=copy+url is it possible to make funnel analysis on that event . Please let me know if we could do it or not .

1801
J
A
Anmol VashishtNew Member
asked in  Building and Sharing Your Analysis
Amplitude Failing My Mobile Website

We are a startup with a mobile website (a react app) and we have observed that the website fails to load for a sizeable chunk (not all) of our users whenever we enable amplitude. On disabling amplitude we see the issue gets resolved. Will appreciate any community inputs/help on the same :)

3973
A
matt
Novice
mattNovice
asked in  Building and Sharing Your Analysis
Rolling Median

Hi all, I know it’s possible to calculate rolling averages and rolling windows using formulas, but has anyone come up with a formula for calculating a rolling median? Something like FREQPERCENTILE(A, .5), but applied over various durations. — Matt

4441
C
E
Novice
Etai FiedelmanNovice
asked in  Building and Sharing Your Analysis
Measuring occuarnce

Hi everyone, What is the right formula that measures the number of unique users who were active a specific number of times over a specific period. For example, I would like to know which users were active at least 4 weeks in a row over the last 12 weeks? Thanks

2840
E
Novice
C
CarmenNew Member
asked in  Building and Sharing Your Analysis
Connecting Amplitude App to Shopify Plus not working

Hi there! I’ve been trying for months to connect Amplitude to my Shopify Plus account. The first time I tried it says that I needed to have a billing account in Australia or other countries (nevertheless the person I spoke with at Amplitude said that it did work in Spain). I’ve tried again now but it now says that Amplitude is not published in the Shopify’s App Store. Hope someone can help me? Cheers!

86116
L
R
raulspil_mcNew Member
asked in  Building and Sharing Your Analysis
How to differentiate between Mobile Web and Desktop Web (and Tablet as a bonus)

Hi all, Is there an equivalent of Google Analytics Device Category in Amplitude? Here’s a post about how GA does it. I’m looking to segment our Web platform events and user properties further by Mobile vs Desktop (and Tablet as a bonus). Here's some Amplitude community topics, that I've found so far, and I think it requires segmenting by a combination of OS and Device type, but I can’t find a clean way of doing it. Many thanks in advance. Raul Similar topics. https://community.amplitude.com/instrumentation-and-data-management-57/amplitude-device-type-and-device-family-fields-129 https://community.amplitude.com/instrumentation-and-data-management-57/counting-users-who-have-done-event-on-mobile-desktop-584 https://community.amplitude.com/instrumentation-and-data-management-57/how-to-get-separate-stats-for-web-and-mobile-app-version-names-368

516811
Saish Redkar
Expert
A
Alex SimonNew Member
asked in  Building and Sharing Your Analysis
My "Avg Session Length" visualization is empty

Hi, The “How long is the average session?” visualisation from my User Activity dashboard doesn’t show any data (all users, last 30 days). I got events from users in other dashboards. Any idea why this might be the case? Thanks

2582
A
S
Conversationalist
Simon HiltonConversationalist
asked in  Building and Sharing Your Analysis
Percentage of accounts who have greater than x users performing an event.

We are trying to move out metrics to be more account based following getting the accounts add on. Many of the metrics we want to measure are structure like % of firms who have at least X users performing Y action. How can we build something like that?

2553
S
Conversationalist

Recent Tips & Tricks

Helpful Members this Week

Popular Topics

Terms & ConditionsCookie settings

Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings