Help Center
Developer Center
Blog
Product Updates
Academy

Homepage
Using Amplitude
Building and Sharing Your Analysis

Building and Sharing Your Analysis

Learn, ask questions, and help others build Amplitude charts and gain valuable insights!

846 Topics
2,255 Replies

When you subscribe we will email you when there is a new topic in this category

846 Topics

Recently active

Most replies Most views Newest first

Joanna LNew Member

asked in Building and Sharing Your Analysis

See All Users in User Look-Up

Hi There, I used to be able to see all users from the User Look-Up. But recently I can only see users who triggered an event in the past 48 hours from User Look-Up. Is there anywhere I can see all users from the User Look-Up?Joanna

leb2.kmuttNew Member

asked in Building and Sharing Your Analysis

Homepage doesn't load

I have been using Amplitude Analytics in the past months with no problem. But starting since last week I cannot load any graphs, not even the Home dashboard.Rarely, it loads, but then I went into User Paths to see more details, it won’t load again.I thought it could be a problem with my internet signal drop, but I can use other website normally. So I reach out to Support.It would be great if you can look into this. Thank you

timothy-permutableSuper Helper

asked in Building and Sharing Your Analysis

Ordering dashboards in spaces

Is there any proper way to order the contents of a space? Currently I use a hack where I pin and unpin things in the right order.

kellyromez1988Novice

asked in Building and Sharing Your Analysis

How to create the cohort for customers who are new to a page?

Hey Amplitude Team,I have a question regarding customers who are new to a specific page. I understand that currently there is a user property `New User` capturing whether a user who triggered the event on Amplitude for the first time, but what feature could I use to identify the `New User` who previous have interactions on other page but is totally new to a specific page? Thanks,

gisellegray_New Member

asked in Building and Sharing Your Analysis

'User session' average length changes for weeks in the past

Hey All!I have a chart set up as the ‘user session type’ looking at avg length.I’ve been checking this chart for a little while and some of the numbers for previous weeks seem to be changing and I’m not sure why this would be the case.For example, two screen grabs below. One from this morning & one from this afternoon. The weeks previous to this also have changed data.Any ideas what this could be?

iremgultekinNew Member

asked in Building and Sharing Your Analysis

How can I show user segmentation over time?

The User Composition analysis feature appears to only take a snapshot in time of a single segment with some characteristics. The lifecycle analysis feature relies on events, which I don’t care about -- I am interested in all users who are of a particular segment, and how much they grow or shrink over several months. How can I get the User Composition analysis to display user characteristics over time?

SAyoNew Member

asked in Building and Sharing Your Analysis

PropCount with Multiple Group By properties

Very new to Amplitude … I am trying to do something along these lines: TOTALS(B)/PROPCOUNT(A) where A is Event A Group By product_id AND UserID and B is Event A; but PropCount only considers the first item in a Group By. In PostGres, I could write the same thing as select (count(*)*1.0/count(distinct concat(product_id, UserID)))::decimal as metric from event_a;, but I have been tasked with writing this in Amplitude. Is there any way to do this in Amplitude? I am looking for the average number of times users visit each product page.Thanks in advance.

aalqarootExperienced

asked in Building and Sharing Your Analysis

Quantify impact of a fix

Hello! Is there a way to quantify the impact of a fix release on a set of charts? I am aware of the release annotation functionality, but I am looking for a functionality that would provide more insights in a chart view. Something like, since release of this fix, we’ve seen metric X increase by Y percent. Thanks, Abdul

luigi7upHelpful Hero

asked in Building and Sharing Your Analysis

Calculating the conversion of part of a funnel A>B>C>D

Hi everyone!I have a funnel that’s based on page views and the first page A is very frequent and a beginning of many funnels. The page B is actually the beginning of the (sub)funnel I’m interested in.I’m interested in calculating the conversion of the funnel A-B-C-D, but only of the steps B-C-DIs there am easy way to calculate that in Amplitude except the manual way where I setup the funnel A-B-C-D and then manually divide the D / B?Best regardsLuka

Winicius OliveiraNew Member

asked in Building and Sharing Your Analysis

Fetch all information from a list of users

I have a list of user_ids and i need to fetch all its profile information for every single id on the list, is there a way to achieve this goal using the API?

timothy-permutableSuper Helper

posted in Building and Sharing Your Analysis

Amplitude vs GA4 Funnels

Just sharing this comparison I’ve written of funnels in Amplitude vs GA4:https://timothydaniell.medium.com/amplitude-analytics-vs-google-analytics-4-funnels-3dae45dcfd38

Trang NguyenNew Member

asked in Building and Sharing Your Analysis

Errors with Amplitude ID importing cohorts

I am trying to upload cohorts using csv file.I have customer data that was not on Amplitude. I wanted to use Amplitude cohort analysis so I created Amplitude ID for each customer information randomizing 12 number characters starting with number 4, all are integers. I tried to upload this cohort but got error message of Amplitude ID have to be integers (although mine were integers already).Can someone help me figure out where the problem is? Please see attached for error snapshotThank you!

brucetianNew Member

asked in Building and Sharing Your Analysis

Is ROLLWINBEFORE working?

Hi, I’m using the ROLLWINBEFORE formula and noticing it produces the same result as ROLLWIN. For a monthly metric, I’m expecting ROLLWIN(UNIQUES, A, 1) gives result for the current month while ROLLWINBEFORE(UNIQUES, A, 1) gives result for last month. Am I interpreting this wrongly? Thanks in advance!

FounderTurnedDSNew Member

asked in Building and Sharing Your Analysis

Reduce steps to obtain user properties

Our team has a Lifecycle chart that shows users who were dormant this past week. I want to make it easy to reach out to those users and learn why they were dormant. Right now on the Lifecycle chart, I click the Dormant Users bar → click View Users → click each User ID one-by-one → click See all other User properties → and then I can see which user it is! Is there a way to surface the user property that enables me to identify this user (e.g. email or name) with fewer clicks? Thanks!

FounderTurnedDSNew Member

asked in Building and Sharing Your Analysis

Computing and displaying WAU percentage

Our team wants to track WAU within our “Target Users” cohort. The numerator should be the number of target users who have an active event in the last 7 days. The denominator should be the total number of target users.I want to display WAU of Target Users as a percentage KPI on our dashboard.I tried to accomplish this by creating a segmentation chart and selecting Active %. I also tried using a Formula of UNIQUES(A1)/UNIQUES(A2) where A1 = Target Users who have an active event and A1 = Target Users. However, inclusion in the segmentation chart is based on whether the user has Any Active Event which means the denominator is incorrect. I need to make the denominator all Target Users rather than pre-filtering on those who have Any Active Event.In terms of displaying the result, I’ve selected to display it in KPI format so it’s a single number, rather a line chart format on the dashboard.I’d like advice on how to compute and display the WAU percentage. Thanks!

Megan JonesNew Member

asked in Building and Sharing Your Analysis

How to hide Get Started walkthroughs

We have completed all suggested steps in the Get Started walkthroughs that is pinned to the bottom right of the screen, and I cannot get it to either progress through the steps or be hidden. If I click on the arrows to see more information on incomplete walkthroughs, nothing happens.How can I remove this? It’s obscuring data that I’m trying to view.Thanks for any help.Get Started minimizedGet Started maximized, stuck on 25%.

rayNew Member

asked in Building and Sharing Your Analysis

Event counts in one session

How can I check the specific event counts in one session?

Michael MarquezNovice

asked in Building and Sharing Your Analysis

Sessions reporting like GA

Hello - I am struggling with creating a session report that behaves like a funnel and shows conversion rate. i think the sessions reporting analysis is what i need but all i see is a “timeline” output. I am needing to see a purchase event / total numbers of sessions = conversion rateBut the closes thing i get is a chart at the bottom with the total number of sessions.

raulspil_mcNew Member

asked in Building and Sharing Your Analysis

Segmenting a funnel by users who did and did not trigger an event, within the same journey

Hi everyone, I need some help with understanding how to segment funnels. I need to measure the impact on funnel conversion, when users perform certain events vs not.So for example, my funnel is ‘viewed products > viewed basket > submitted the order from the basket”, and I want to see what’s the impact of users engaging with some filters on the product page. For this, I’ve created two segments, and was particular about setting the “any time - within 10 mins” the same time frame as the overall completion time of the funnel, to make sure I’m accurately ONLY including users who engage with the filter within the same journey, rather than a later session. Nevertheless, my confidence is low because the data surprises me, and when I explore the journey paths, I see some users engaging with the filters in the “didn’t use filter” segment and vice versa. Also, I am not quite sure how to get accurate trend data for this funnel, for example, weekly. Choosing: any time - within the same week

AmélieNew Member

asked in Building and Sharing Your Analysis

Registration rate

Hi there, How to create a graph to measure the registration rate? For the moment, I have done a funnel analysis with events performed 1/ any active event 2/ sign_in completedIs this correct?I'm surprise not finding a default event "launch session" that would have been useful in my case : during the first session, how many users have been created an account. Thank you for the help,

YevhenKralychNew Member

asked in Building and Sharing Your Analysis

Retention Report includes old users in cohorts

So I’m trying to make sense of Retention reports but something strikes me as odd.I’ve chosen a starting even and a returning event for my report in the event module. While exploring the data, I noticed that monthly cohorts include users from previous month as well While the figure for November 2021 is correct, the figure for December 2021 includes returning users from the previous months as well as new ones. This can be verified by looking at the lifecycle report which shows 307 news users and 57 returning ones (which adds up to 357 in the retention report). Same applies to all the subsequent months. Is there something I’m doing wrong? Clearly my expectation of how the retention report is supposed to work doesn’t match the reality. I need clarification. Thanks everybody!

GalSaadaNew Member

asked in Building and Sharing Your Analysis

Measuring avg time between steps cross users

Hey,I’ve steps in the platform the can be triggered by different users and I want to measure the avg time between steps. For example I’ve task and each task have status (open, in progress, done) and I want to see the avg time for moving open to in progress and in progress to done.But the events can be triggered by different users.How can I do it? should I using funnel or any other chart?

Ingmar OemigNew Member

asked in Building and Sharing Your Analysis

First event in period

Hi community,Is there a way to create a funnel to see how many users had a certain event as their ‘first’ event in a period.I.e. it is currently possible to exclude users who performed certain events between other events in the funnel (see screenshot). But is it possible to exclude users who performed certain events before the first event in the funnel. Specifically, I want to know how many of our daily users opened a push notification without having opened our app previously that day - are my push notifications generating daily usage that otherwise would not have taken place, or is it only users that are already active that open my push notifications. In the screenshot, I want to see “opened push notifications” and then exclude all ‘start sessions’ performed before the ‘push notification’. Thank you!

asked in Building and Sharing Your Analysis

I don't understand how "user's session"

Hello,I’m new here ( i basically started a week ago ), and i wanted to know what is wrong with my graph => I want to track how many user are using a specific feature ( with user session ) when they connect, but when i do so, here’s what happen There is a flat line, which i know is false so something must be false in my command?I hope anybody can help me =)

dorohedoro1New Member

asked in Building and Sharing Your Analysis

Mass change of charts in one dashboard

Hi. This might be just a simple yes or no question. Is there anyway to change all the charts in one dashboard easily? I have a template dashboard with about thirty charts and I use it to create a new client. I have to change each of the chart for every client to recreate the whole dashboard.

1
...
16
17
18
19
20
21
22
...
34

Page 19 / 34

Powered by Gainsight

Terms & Conditions Cookie settings

Welcome to the Amplitude Community!

If you don't have an Amplitude account, you can create an Amplitude Starter account for free and enjoy direct access to the Community via SSO. Create an Amplitude account. You can also create a Guest account below!

If you're a current customer, select the domain you use to sign in with Amplitude.

analytics.amplitude.com analytics.eu.amplitude.com

or

Username *

E-mail address *

Password *

I accept Terms & Conditions.

loginBox.register.email_repeat

Welcome to the Amplitude Community!

If you don't have an Amplitude account, you can create an Amplitude Starter account for free and enjoy direct access to the Community via SSO. Create an Amplitude account. Want to sign up as a guest? Create a Community account.

If you're a current customer, select the domain you use to sign in with Amplitude.

analytics.amplitude.com analytics.eu.amplitude.com

or

Sign in as a guest with Username or Email

Password

Remember me

Forgot password?

Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.

Username or e-mail

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

OK

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.

OK